GLEDOPTO GL-C-015WL WLED Controller – 2 Output Wi-Fi
GLEDOPTO GL-C-015WL WLED Controller – 2 Output Wi-Fi
Couldn't load pickup availability
Technical Specification
| Brand | GLEDOPTO |
|---|---|
| Model | GL-C-015WL |
| Colour | White |
| Controller type | Digital / SPI |
| Processor | ESP32 |
| Firmware | WLED |
| Input voltage | DC 5-24V |
| Max. current total | 15A |
| Max. current per output | 10A |
| Number of outputs | 2 |
| Sound reactive (built-in mic) | No |
| Connectivity | Wi-Fi |
| Smart home | Home Assistant, Alexa |
| Supported LED protocols | WS2811, WS2812B, WS2813, WS2815, SK6812, other compatible addressable LEDs, including fairy lights |
| IP rating | IP20 |
| Material | Flame Retardant PC |
| Working temperature | -20 ~ 45°C |
| Dimensions | 108mm x 45mm x 18mm |
| Certifications | RoHS, CE |
| User Manuals |
The GLEDOPTO GL-C-015WL is a 2-channel WLED controller with two digital outputs. Connect and control up to two addressable LED strips independently, with one strip per output. Powered by an ESP32 and supplied with WLED pre-installed, it lets you control colours, brightness and lighting effects from the WLED app or web interface.
Connect up to two LED data lines to one controller. Use WLED segments to control each lighting zone separately, then save your settings as presets for everyday use.
This is the standard GL-C-015WL without a built-in microphone. It’s suited to projects such as desk lighting, display shelving and ambient room lighting.
Why Choose the GL-C-015WL?
- ESP32-based controller with WLED pre-installed
- Two configurable LED data outputs on GPIO16 and GPIO2
- Wi-Fi control through the WLED app or web interface
- 5–24V DC input for compatible addressable LED strips
- Up to 10A per channel and 15A total through the controller
- Supports WLED segments, presets, colour palettes and built-in effects
- No firmware flashing required for initial setup
Compatible Addressable LED Chipsets
Compatible addressable LED types include:
- WS2811
- WS2812B
- WS2813
- WS2815
- SK6812 RGBW
Select the matching LED type and pixel count in WLED, and use a DC power supply that matches the strip’s voltage.
For digital addressable strips and pixels only. Standard analogue RGB, RGBW, RGB+CCT and single-colour strips require an analogue controller.
Typical Applications
- Desk and monitor lighting
- Ambient TV backlighting
- Shelving and display cabinet lighting
- Ceiling cove and accent lighting
- Gaming room lighting
- Addressable pixel displays
Hardware Features
Two LED Data Outputs
The controller has two dedicated LED data outputs on GPIO16 and GPIO2. GPIO16 is the default output. To use both, add GPIO2 as a second output in WLED’s LED Preferences and set the LED type and pixel count for each run.
5–24V DC Input
Use a power supply that matches the voltage of your LED strips. For example, pair a 5V WS2812B strip with a 5V DC power supply or a 12V WS2815 strip with a 12V DC power supply.
Power and Current Limits
The controller is rated for up to 10A per channel and 15A across both channels combined. Longer LED runs may need power injection to reduce voltage drop, especially if the far end dims or changes colour at higher brightness.
Frequently Asked Questions
Does it come with WLED installed?
Yes. WLED is pre-installed and ready for you to configure your Wi-Fi and LED strips.
Can I control it from my phone?
Yes. Use a compatible WLED app or open the controller’s web interface in your phone’s browser.
Can each output control a different LED strip?
Yes. Configure both outputs in WLED, then create separate segments to control each strip’s colour, brightness or effects independently.
Does this version have a microphone?
No. This is the standard GL-C-015WL without a built-in microphone.
Can I connect 5V and 12V strips at the same time?
The controller’s power terminals share the input voltage. Any strips powered through those terminals must match the voltage of the controller’s power supply.
Does it include LED strips or a power supply?
LED strips and the DC power supply are sold separately.
Share
