GLEDOPTO GL-C-611WL Elite Series 5P-EXMU PWM 5 in 1 WLED Controller
GLEDOPTO GL-C-611WL Elite Series 5P-EXMU PWM 5 in 1 WLED Controller
Couldn't load pickup availability
Technical Specification
| Brand | GLEDOPTO |
|---|---|
| Model | GL-C-611WL |
| Colour | White |
| Controller type | Analogue / PWM |
| Processor | ESP32 |
| Firmware | WLED |
| Input voltage | DC 5-48V |
| Max. current total | 15A |
| Max. current per output | 10A |
| Sound reactive (built-in mic) | Yes |
| Connectivity | Wi-Fi, Ethernet |
| Smart home | Home Assistant, Alexa |
| Supported LED protocols | RGB, RGBW, RGB+CCT, CCT, Single Colour |
| IP rating | IP20 |
| Material | Flame Retardant PC |
| Dimensions | 129mm x 50mm x 23mm |
| Certifications | RoHS, CE |
The GLEDOPTO GL-C-611WL is a 5-in-1 Wi-Fi and Ethernet WLED controller designed for analogue LED strips. Supporting RGBCCT, RGBW, RGB, CCT and single-colour LED strips, it provides flexible smart lighting control without soldering, flashing firmware or assembling your own controller.
Powered by an ESP32 with WLED pre-installed, the GL-C-611WL lets you adjust colours, brightness, white colour temperature and compatible lighting effects using the WLED mobile app or web interface.
With both Wi-Fi and Ethernet connectivity, an integrated microphone for sound-reactive lighting and support for DC 5–48V, this controller is suitable for a wide range of indoor lighting projects, including room lighting, kitchen cabinets, ceiling coves and decorative installations.
Why Choose the GL-C-611WL?
- 5-in-1 analogue LED control – supports RGBCCT, RGBW, RGB, CCT and single-colour LED strips
- WLED pre-installed – ready to configure without flashing firmware
- Wi-Fi and Ethernet connectivity – choose wireless or wired network control
- Wide voltage support – compatible with DC 5V, 12V, 24V, 36V and 48V LED strips
- Five PWM channels – control compatible colour and white LED channels
- Sound-reactive lighting – built-in microphone for effects that respond to music and ambient sound
- Up to 15A total output – supports up to 10A per channel, subject to the combined 15A limit
- Smart home integration – compatible with WLED integrations such as Home Assistant
- Additional GPIO connection – GPIO13 available for compatible DIY functions
Compatible LED Strip Types
The GL-C-611WL supports five analogue LED strip configurations:
| LED Type | Description |
|---|---|
| RGBCCT | RGB colours with independently adjustable warm and cool white channels |
| RGBW | RGB colours with a dedicated white channel |
| RGB | Standard colour-changing LED strips |
| CCT | Tunable white strips with adjustable colour temperature |
| Single Colour | Brightness control for single-colour LED strips |
The controller uses PWM (Pulse Width Modulation) to adjust the brightness of individual colour channels.
Important: This controller is designed for analogue constant-voltage LED strips. It does not support individually addressable LED strips such as WS2812B or WS2815. Unlike addressable LEDs, analogue strips change colour or brightness together across the connected strip.
Frequently Asked Questions
Can I use the GL-C-611WL with RGB+CCT LED strips?
Yes. The controller supports RGBCCT LED strips with separate red, green, blue, warm white and cool white channels. You can adjust RGB colours and white colour temperature through WLED.
Does the controller support music-reactive lighting?
Yes. The built-in microphone allows compatible WLED effects to respond to music and surrounding sounds. With analogue LED strips, the entire connected strip responds together rather than displaying individually moving pixel effects.
Can I connect multiple LED strips?
Yes. Multiple compatible analogue LED strips can be connected, provided the wiring configuration, power supply and combined electrical load remain within the controller's limits. The five PWM channels are primarily used for colour and white control, rather than five independent addressable LED outputs.
Can I use Ethernet instead of Wi-Fi?
Yes. The GL-C-611WL includes an RJ45 Ethernet connection for wired network control. Ethernet can be configured through the WLED settings.
Do I need a separate power supply?
Yes. A suitable DC power supply is required. Its voltage must match the connected LED strip, and its capacity must be sufficient for the total lighting load.
Can I use the controller with Home Assistant?
Yes. WLED supports integration with Home Assistant, allowing you to control compatible lighting and use it in smart home automations.
Share
