GLEDOPTO GL-C-619WL Elite WLED Controller – 6 Output Ethernet & Wi-Fi

GLEDOPTO GL-C-619WL WLED Controller – 6 Output Ethernet & Wi-Fi

The GLEDOPTO GL-C-619WL Elite is a six-output WLED controller designed for multi-zone addressable LED strips and pixel lighting. Based on an ESP32 and supplied with WLED pre-installed, it provides network control through 2.4GHz Wi-Fi or a wired RJ45 Ethernet connection.

With six independent addressable LED outputs and support for 5V–48V DC input, the GL-C-619WL is suited to larger and more complex LED installations where multiple strips or pixel runs need to be connected to one controller. WLED provides control through its web interface or compatible mobile apps, with support for effects, segments, presets and smart-home integration.

Why Choose the GL-C-619WL Elite Series?

• ESP32-based WLED controller with WLED pre-installed
• 6 independent addressable LED outputs
• Up to 15A total maximum output current
• Wide DC 5V–48V input voltage range
• 2.4GHz Wi-Fi and wired RJ45 Ethernet connectivity
• 5V / 3A maximum Type-C power input for suitable 5V installations
• Compatible with Home Assistant and WLED-supported network protocols
• Built-in replaceable fuse protection
• Flame-retardant PC housing

Compatible Addressable LED Chipsets

The GL-C-619WL supports a wide range of addressable LED protocols supported by WLED. Compatible LED types include:

• WS2811
• WS2812B
• SK6812
• WS2815
• Other compatible 3-pin digital addressable LED strips

Not suitable for:

• Standard analogue RGB LED strips (4-pin non-addressable)
• Analogue RGBW or RGBCCT LED strips (5-pin / 6-pin non-addressable)
• Constant-current LED fixtures

Typical Applications

• Multi-zone home and room lighting
• Large addressable LED installations
• Gaming room and desk lighting
• TV and monitor ambient backlighting
• Architectural and ceiling lighting
• Longer-voltage LED installations
• Holiday and Christmas pixel displays
• Home Assistant smart lighting automation

Hardware Features

Ethernet & Wi-Fi Connectivity

Connect the controller to your network using 2.4GHz Wi-Fi or RJ45 Ethernet. Ethernet provides a wired network connection where a more consistent connection is preferred.

Six Independent LED Outputs

The GL-C-619WL provides six physical addressable LED data outputs, allowing multiple LED strips or pixel runs to be connected to one controller. The outputs can be configured in WLED for separate lighting zones, effects and LED configurations.

Wide 5V–48V Power Input

The controller supports a wide 5V, 12V, 24V, 36V and 48V DC input range through the screw terminals. A 5V / 3A maximum Type-C input is also provided for suitable 5V installations.

Fuse Protection

The controller includes a replaceable fuse to provide overcurrent protection for the controller's power circuit.

Technical Specifications

What's in the Box?

• 1× GLEDOPTO GL-C-619WL Elite WLED Controller (White)
• 1× User instruction manual
• 1× Adhesive mounting pad (5 × 3 cm)
• 1x 5A replaceable fuse
• 2× Eight-hole terminal blocks
• 2× Red and black connection cables

Important Power & Voltage Information

The LED strip voltage must match the power supply voltage. For example, use a 5V power supply with a 5V WS2812B strip, a 12V power supply with a 12V WS2815 strip, or a 24V power supply with a compatible 24V addressable LED strip.

The controller passes the supply voltage through to the LED outputs, so it does not convert between voltages. Always use a power supply that matches the voltage required by your LED strip.

For long LED runs or high-density strips, additional power injection may be required to minimise voltage drop. Power injection does not increase the controller's rated output capacity, which remains 15A total maximum.

Power supply not included. Use a regulated DC power supply with the correct voltage and sufficient current capacity for your LED installation.

Frequently Asked Questions

Does it come with WLED pre-installed?
Yes. The controller is supplied with WLED pre-installed and is ready for network setup. Firmware versions may vary between production batches.

Can I use Ethernet instead of Wi-Fi?
Yes. The GL-C-619WL supports both RJ45 Ethernet and 2.4GHz Wi-Fi, allowing you to choose a wired or wireless network connection.

Can I power the controller via the Type-C port?
Yes. The Type-C input supports 5V / 3A maximum and is intended for suitable 5V installations. For higher-voltage LED installations, use the DC screw-terminal input.

Does it work with Home Assistant?
Yes. WLED controllers can be integrated locally with Home Assistant using the native WLED integration.

Can I control six LED strips independently?
Yes. The GL-C-619WL provides six physical addressable LED outputs, allowing multiple LED strips or pixel runs to be connected to one controller. The outputs can be configured in WLED for separate lighting zones and effects.

Can the GL-C-619WL be used with 48V LED strips?
The controller supports a DC input range up to 48V. The LED strip itself must be specifically designed for the supplied voltage. Always verify the required voltage and compatibility of the LED strip before connecting it.

Ideal For

The GLEDOPTO GL-C-619WL Elite is suited to larger and more complex addressable LED installations where six outputs, wide 5V–48V voltage support, WLED control and Ethernet connectivity are required. It is suitable for multi-zone lighting, architectural installations, gaming setups, pixel displays and Home Assistant projects.